Careers

Reidco Metal Industries is looking to expand our Engineering team! This is a full-time permanent role in a busy office environment in our new state-of-the-art building.

At Reidco, we do not offer jobs – we offer careers. We are continuously investing in training, growth and offer long-term, stable employment. We encourage putting your initiative and resourcefulness to work. We believe in empowering you by giving you the ownership and responsibility over problems and your solutions.

We are looking to add to our engineering team. This position reports to the engineering manager. This role will primarily support the engineering team with setting up new parts, preparing work order folders containing shop instructions, revising parts when requested by our customers and working on special projects as required. We plan to add someone with metal manufacturing knowledge to our team. We are always looking to improve what we are doing and being knowledgeable in continuous improvement is a strong asset.

As Reidco supplies to the defense industry, candidates must be able to be controlled goods certified and pass a security check.

Job Responsibilities:

Engineering:

Creating Solidworks sheet metal CAD models for programming

Creating Solidworks shop drawings from CAD files

Programming files for laser cutting and turret punch presses

Updating drawings/models

Rev changes for various customers

Create bills of materials and job routing in ERP system

Create shop packages for production

Other duties as required.

Knowledge, skills and abilities:

Requirements:

Familiarity with Solidworks sheet metal

Positive attitude

Accurate and methodical

Able to work well individually and amongst a team

Ability to think critically

Effectively communicate with lead hands, supervisors and management

Knowledge of MS Office suite (Access, Excel, Outlook and Teams)

Familiarity with SolidWorks or similar CAD software

Continuous improvement mindset, (5S, Lean, six-sigma knowledge are all assets)

Degree or diploma in mechanical engineering, or a similar field

Assets:

Familiarity with ERP software

GD&T fundamentals

ISO 9001 knowledge

We thank all applicants for their interest, but only those chosen for an interview will be contacted.

Reidco is looking to hire an engineer or engineering technologist to support the quality and engineering teams at Reidco, this position reports to the quality manager. This role will primarily support the quality department and perform final inspections on finished goods. In addition to inspection duties, working on tasks to improve our internal quality systems and process flow. This position will also assist our engineering team with setting up new parts, preparing work order folders containing shop instructions and revising parts when requested by our customers.

As Reidco supplies to the defense industry, candidates must be able to be controlled goods certified and pass a security check. Eligible candidates must also be legally entitled to work in Canada.

Job Responsibilities:

Quality:

Physical inspection of flat, welded, or formed sheet metal parts

Ensure compliance to internal standards and process’

Maintain a non-conformance database

Ability to work with operators to root cause non-conformances

Track non-conformances, recommending corrections to lead hands, supervisors and management

Adhere to strict quality guidelines as directed by our customers

Maintain calibration database

Push continuous improvement initiatives

Engineering:

Creating sheet metal CAD models for programming

Creating shop drawings from CAD files

Programming files for laser cutting

Updating drawings/models

Rev changes for various customers

Other duties as required.

Knowledge, skills and abilities:

Requirements:

Degree or Diploma in engineering or similar technical

Positive attitude

Accurate and methodical

Able to work well individually and amongst a team

Ability to think critically

Effectively communicate with lead hands, supervisors and management

Knowledge and ability to operate measurement instrumentation such as calipers, micrometers, gage blocks, go/no-go gages, height gages etc.

Knowledge of MS Office suite (Access, Excel, Outlook and Teams)

Familiarity with SolidWorks or similar CAD software

Organized and able to document quality tasks

Continuous improvement mindset, (5S, Lean, six-sigma knowledge are all assets)

Assets:

Familiarity with ERP software

GD&T fundamentals

PPAP and FAI process

ISO 9001 knowledge

Physical Requirements:

Ability to lift up to 50 lbs

Able to stand for extended periods of time

Manual dexterity to operate measurement instrumentation

We thank all applicants for their interest, but only those chosen for an interview will be contacted.

Are you looking to get into the trades, such as welding, operating brake presses, turret punches, shears, and lasers? At Reidco we are looking for general labourer’s to assist many departments. To the right candidates, this is the start of a career in metal fabrication. If you have little to-no experience, but a can-do attitude we offer training, a safe workplace, and the ability to grow your career with Reidco!

This position can grow into positions such as Laser operator, Turret operator, Brake Press operator, Welder and shipper.

As a general labourer, you will wear many hats and have a variety of duties including, but not limited to:

• Grinding/cleaning metal parts
• Organizing the workplace
• Material handling
• Driving forklift
• Assisting machine operators

Job Requirements

• Physically fit, able to lift 50 lbs.
• Reliable and dependable
• Good attention to detail
• Able to focus on tasks
• Quick to learn
• Able to prioritize and accomplish multiple tasks
• Mechanical aptitude
• Experience with shop tools (training will be provided)
• Forklift experience is an asset

Schedule

Day shift: Mon-Fri 6:00am-2:30pm

Afternoon shift: Mon-Thurs, 2:15pm-12:30am (4x 10hour shifts, afternoon shift premium)

Reidco Metal Industries is looking for a Brake press operator to join our amazing team! This is a full-time permanent role on our production floor. We offer a competitive wage, profit-sharing program, and a great benefits package.

You will be responsible for:

• Safe set-up and operation of CNC Brake Presses
• Machine monitoring to ensure accurate output of parts that meet or exceed quality standards
• Measuring of parts to ensure quality requirements are achieved
• Operation of equipment in accordance with Health, Safety & Quality policies, and procedures

Required qualifications:

• Minimum of 1 – 2 years of experience setting up and operating CNC Brake Presses
• Ability to read and interpret blueprints and shop drawing specifications
• Ability to use precision measuring tools (calipers, protractors, square)
• Strong attention to detail
• Good interpersonal and communication skills
• Work well in a team environment
• Strong work ethic
• Forklift experience is an asset

Schedule

Day Shift: Mon-Fri, 6:00am-2:30pm

Afternoon shift: Mon-Thurs, 2:15pm-12:30am (4x 10hour shifts, afternoon shift premium)

Reidco Metal Industries is looking for a production welder to join our amazing team! This is a full-time permanent role on our production floor; Day and afternoon shifts available. We offer a competitive wage, profit-sharing program, and a great benefits package. We are in our brand new building with climate control, LED lighting and welding fume extraction right at your work bench.

As a production welder,

You will be responsible for:

• Safe set-up and operation of welding equipment
• Ensure accurate output of parts meeting or exceeding quality standards
• Measuring of parts to ensure customer quality requirements are achieved
• Operation of equipment in accordance with Health, Safety & Quality policies & procedures

Required qualifications:

• Minimum of C level certification with 1-2 years of experience
• Experience with Steel MIG welding technique
• Exceptional fitting skills for very tight tolerances
• Ability to read and interpret blueprints and shop drawings
• Forklift experience is an asset
• We do in house CWB tickets and training, GMAW/GTAW

Schedule

Day Shift: Mon-Fri, 6:00am-2:30pm

Afternoon shift: Mon-Thurs, 2:15pm-12:30am (4x 10hour shifts, afternoon shift premium)